Browsing by Author "Onder, Alper"

Now showing 1 - 5 of 5

Adsorption of Malachite Green From Aqueous Solution Using Hydroxyethyl Starch Hydrogel Improved by Graphene Oxide
(Springer, 2022) Onder, Alper; Kivanc, Mehmet Riza; Durmus, Secil; Ilgin, Pinar; Ozay, Hava; Ozay, Ozgur
This study is the first report of the preparation of hydroxyethyl starch (HES) hydrogels rapidly crosslinked with divinyl sulfone in a single step and single pot. To develop the physical and chemical features of hydrogels, Graphene oxide (GO) nanoparticles were combined with the crosslinked HES. In addition to swelling studies, structural characterization of the samples was conducted with a scanning electron microscope (SEM) and transmission electron microscope (TEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffractometry (XRD), Brunauer-Emmett-Teller (BET) analysis and thermogravimetric analysis (TGA). For the removal of malachite green model dye by GO-HES, the effects of GO content, solution concentration, temperature, contact duration, dosage and pH on varying adsorption features were researched. Additionally, adsorption isotherms, kinetic and thermodynamic systematics were analyzed. The maximum adsorption capacity of GO-HES composite hydrogel was found to be 89.3 mg/g for Langmuir isotherm. The possible adsorption mechanism of the composite hydrogels for malachite green dye involved electrostatic, hydrogen bonding, and pi-pi interactions. In addition to reasonable cost and simple synthesis method, the prepared composite materials have potential use in wastewater treatment as adsorbents for the removal of dye from aqueous solutions due to efficient adsorption capacity.
Adsorption of Methylene Blue From Aqueous Solution Using Poly(2-Acrylamido Acid-Co Methacrylate) Hydrogel Crosslinked by Activated Carbon
(Taylor & Francis inc, 2023) Ilgin, Pinar; Onder, Alper; Kivanc, Mehmet Riza; Ozay, Hava; Ozay, Ozgur
This study aimed to develop an environmentally friendly, inexpensive, and efficient adsorbent for removing methylene blue (MB) dye from wastewater using a three-dimensional porous poly(2-Acrylamido-2-methyl-1-propanesulfonic acid-co-2-Hydroxyethyl Methacrylate), p(AMPS-co-HEMA) composite hydrogel crosslinked with vinyl-functionalized activated carbon (VAC). The surface morphology and chemical structure of the crosslinker were characterized using transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) surface area analysis, X-ray spectroscopy (XRD) and Fourier transform-infrared spectroscopy (FT-IR) instruments. The surface morphology, chemical structure and thermal properties of the hydrogel were also characterized using scanning electron microscopy (SEM), FT-IR and thermogravimetric analyzers (TGA). Experimental parameters affecting the adsorption behavior, such as initial dye concentration, time, dosage, pH, and temperature, were systematically investigated. Hydrogel achieved optimal MB removal efficiency (69.53%) at an initial MB concentration of 250 mg/L (1 mg/mL, pH not adjusted) over 24 h. Adsorption kinetics, isotherm, thermodynamic studies, and reusability were investigated. Experimental adsorption isotherm and kinetic data followed the Langmuir model and pseudo-second-order kinetics with a maximum adsorption capacity of 284.90 mg/g hydrogel at 293 K. Thermodynamic findings proved the spontaneity and endothermic behavior of the adsorption process. After 5 adsorption-desorption cycles, the adsorption capacity of the composite hydrogel decreased by only 7.51 mg/g compared to the initial adsorption capacity.
Magnetic Hydrogel Syntheses and Their Applications in the Environment for the Removal of Toxic Metal Ions
(Amer Chemical Soc, 2009) Ozay, Ozgur; Onder, Alper; Sahan, Tekin; Aktas, Nahit; Baran, Yakup; John, Vijay T.; Sahiner, Nurettin
Synthesis of P(hema-Co Nanocomposite Hydrogel With Vinyl-Function Montmorillonite Nanoparticles and Effective Removal of Methyl Orange From Aqueous Solution
(Taylor & Francis inc, 2023) Onder, Alper; Kivanc, Mehmet Riza; Ilgin, Pinar; Ozay, Hava; Ozay, Ozgur
It has become crucial to develop new adsorbents to remove toxic dye wastes from wastewater to protect our existing aquatic ecosystem. Here, to remove methyl orange azo dye from aqueous solutions, a new p(HEMA-co-AETAC)/VMt nanocomposite hydrogel was prepared by using 2-hydroxyethyl methacrylate and [2-(acryloyloxy)ethyl]trimethylammonium chloride monomers using vinyl-based montmorillonite crosslinker. Obtained new types of crosslinker and nanocomposite hydrogels have been characterized by various analysis methods. In addition, the effects of crosslinker amount, monomer amount and pH on the swelling behavior of nanocomposite hydrogel were investigated. The effects of essential parameters such as contact time, initial dye concentration, pH effect of the solution, adsorbent amount, and temperature on adsorption were evaluated. It was determined that there was no significant change in the adsorption ability of the nanocomposite hydrogel in the pH range of 3-10. Experimental results showed that the Langmuir isotherm model fit better, and the calculated maximum adsorption capacity was 961.54 mg/g. In addition, it was determined that vinyl-based montmorillonite used as a crosslinker supported MO adsorption. p(HEMA-co-AETAC)/VMt nanocomposite hydrogel may be a new type of adsorbent to remove toxic synthetic dye residues from aqueous media.
Synthesis, Characterization, and in Vitro Drug Release Properties of Aunps/P(aetac-co-vi) Nanocomposite Hydrogels
(Springer Heidelberg, 2021) Durmus, Secil; Yilmaz, Betul; Kivanc, Mehmet Riza; Onder, Alper; Ilgin, Pinar; Ozay, Hava; Ozay, Ozgur
In this study, the cationic monomer [2-(acryloyloxy)ethyl]trimethylammonium chloride solution (AETAC) and vinyl imidazole (VI) were used with the free radical polymerization technique, which is a simple and rapid synthesis method, to synthesize p(AETAC-co-VI) hydrogels. To increase the density of cationic charge on the hydrogel, it underwent the protonation process with HCl. The obtained p(AETAC-co-VI)/Q hydrogel was modified with Au nanoparticles to increase bactericidal effect to obtain the AuNPs/p(AETAC-co-VI)/Q nanocomposite hydrogel. The morphology and chemical structure of the hydrogels were characterized with SEM and FTIR. Additionally, the swelling capabilities were tested in different pH media. XRD and TEM confirmed the formation of the nanocomposite hydrogel. The antibacterial activity of the hydrogels was tested against E. coli and S. aureus, and controlled release implementations were completed with sodium diclofenac (NaDc) drug. The NaDc drug release profiles of the hydrogels were researched using the Korsmeyer-Peppas model at 37 degrees C in different simulated buffer (pH 6.0, 7.2, and 8.0) solutions. It was found that both the hydrogel and nanocomposite hydrogel followed non-Fickian diffusion mechanisms as free release mechanism. Here, the maximum drug release efficacy was found to be 97%, and drug release was more rapid in basic media when release media were compared. The AuNPs/p(AETAC-co-VI)/Q nanocomposite hydrogels produced in this study with advanced antibacterial features were suitable for recommendation as good carriers for in vitro release of NaDc drugs in areas like the biomedical and pharmaceutical industries.