Browsing by Author "Peker, H."

Now showing 1 - 2 of 2

Effect of Thermal Modification and Picture Varnish Application on Color Change of Scots Pine (Pinus Sylvestris L.) Wood
(Lukasiewicz Research Network - Poznan Institute of Technology, 2025) Peker, H.; Ayata, Ü.; Ulay, G.
Scots pine is one of the important tree species used by the wood processing industry in many countries for both interior and exterior applications. It is well known that thermal treatment alters the color of wood. To protect wood from outdoor environmental conditions, certain chemicals are applied to its surface. These protective chemicals also influence the color of thermally treated wood. In this study, the color-altering effect of picture varnish (refined linseed oil), commonly used as a protective chemical in the field of painting, was investigated on both thermally treated and untreated wood materials. Scots pine (Pinus sylvestris L.) wood samples were subjected to thermal treatment at 212 °C for 2 h. Following this, varnish made from refined linseed oil was applied to some of these samples and some untreated samples, with the remaining untreated samples used as controls. Color and whiteness index (WI*) values were analyzed on the resulting four different materials, and the results were compared. Analysis of variance showed significant effects for the factors of heat treatment, picture varnish application, and their interaction, on WI* (
The Effect of Weathering on Color and Glossiness Properties of Polyurethane-Modified Water-Based Varnish Layers Applied to Thermally Treated Ash Wood
(North Carolina State University, 2025) Ulay, G.; Akter, M.; Çakıcıer, N.; Peker, H.; Ayata, Ü.; Atılgan, A.; Çiftçi, S.
The effects of artificial weathering (168, 336, and 504 h) on the glossiness values and color parameters of varnished, polyurethane-modified ash wood were investigated. Samples included control samples without treatment and thermally treated samples under two different conditions (190 °C for 1.5 h and 212 °C for 2 h), all coated with a polyurethane-modified water-based varnish. In non-thermally treated and varnished samples, decreases in L* values were observed after weathering, while increases were noted in ho, C*, b*, and glossiness at 60° in both perpendicular and parallel directions to the fibers. After weathering, for samples thermally treated at 190 °C for 1.5 h and varnished, increases were observed in glossiness values at 20° and 60° in both directions, as well as in L*, b*, and ho values. Conversely, decreases were noted in a* and C* values. In samples thermally treated at 212 °C for 2 h and varnished, increases in a*, L*, ho, b*, and C* values were detected after weathering, whereas decreases were observed in glossiness at all angles (20° and 60°) in both directions. The ∆E* values showed a decreasing trend in non-thermally treated varnished samples after weathering, while an increase was observed in samples thermally treated at 212 °C for 2 h and varnished. © 2025, North Carolina State University. All rights reserved.