Browsing by Author "Suvari, Gamze"
Now showing 1 - 2 of 2
- Results Per Page
- Sort Options
Article Electrochemical Tryptophan Sensor Depending on the Electrodeposition of Au Nanoparticles on the Activated Glassy Carbon Electrode(Wiley-v C H verlag Gmbh, 2025) Suvari, Gamze; Guler, MuhammetIn the present work, a novel electrochemical sensor was designed for the electrochemical detection of tryptophan (Trp). With this object in our mind, the glassy carbon electrode (GCE), utilized as the working electrode for Trp detection, was first activated in 0.1 M phosphate buffer solution (pH 7.0) by means of cyclic voltammetry. Subsequently, gold (Au) nanoparticles were electrochemically deposited on the activated GCE (AGCE) electrode in 0.1 M NaNO3 (pH 3.0). The obtained Au@AGCE was performed for the determination of Trp. After optimizing the working conditions, electrochemical performance factors of the sensor, such as linear detection range, sensitivity, limit of detection (LOD), repeatability, selectivity, and reproducibility were investigated. The sensor showed two dynamic detection ranges for Trp. The first range, with a sensitivity of 2280.79 mu A mu M--(1) cm(-)2, was between 0.4-75.8 mu M, and the second range, with a sensitivity of 260.1 mu A mu M--(1) cm(-)2, was between 75.8-175 mu M. For the repeatability, the relative standard deviation (RSD) values were found to be in the range of 0.29%-5.26%. For reproducibility, the RSD values ranged from 3.43% to 6.03%. Additionally, Trp tablets were used to determine Trp as the real sample. The results indicated that the sensor had satisfactory performance factors.Master Thesis Electrodeposition of Au Nanoparticles on Activated Glassy Carbon Electrode and Its Electrochemical Application for L-Tryptophan(2024) Suvari, Gamze; Güler, MuhammetÇalışmamızda triptofanın (Trp) elektrokimyasal olarak tayin edilmesi için yeni bir sensör tasarlandı. Bunun için çalışma elektrodu olarak kullanılan camsı karbon elektrot (GCE) önce pH değeri 7 olan 0.1 M fosfat tamponunda dönüşümlü voltametri kullanılarak aktifleştirildi. Daha sonra altın (Au) nanoparçacıkları aktifleştirilmiş GCE (AGCE) elektrodu üzerine elektrokimyasal olarak biriktirildi. Elde edilen Au@AGCE Trp'nin tayini için kullanıldı. Sensörün en iyi cevap verdiği koşullar elde edildikten sonra Trp için doğrusal tayin aralığı, gözlenebilme sınırı (LOD), tekrarlanabilirliği, tekrar oluşturulabilirliği ve depolama kararlılığı gibi performans faktörleri değerlendirildi. Sensör Trp için iki tane doğrusal aralık gösterdi. 1. Tayin aralığı, duyarlılığı 2280.79 A M-1 cm-2 olan 0.4-75.8 M aralığında, 2. Tayin aralığı ise duyarlılığı 260.1 A M-1 cm-2 olan 75.8-175 M aralığında belirlendi. Sensörün tekrarlanabilirliği için aynı elektrot ile 3 farklı Trp derişimi kullanıldı. Bağıl standart sapma değerleri (RSD) 0.29-5.26 aralığında bulundu. Sensörün tekrar oluşturulabilirliği için 5 farklı elektrot ile 3 farklı Trp derişimi kullanıldı. Bağıl standart sapma değerleri (RSD) 3.43-6.03 aralığında bulundu. Ayrıca gerçek örnekte Trp'nin tayini için Trp tabletleri kullanıldı. Elde edilen sonuçlar sensörün tatmin edici performans faktörleri sergilediği görüldü.