YYÜ GCRIS Basic veritabanının içerik oluşturulması ve kurulumu Research Ecosystems (https://www.researchecosystems.com) tarafından devam etmektedir. Bu süreçte gördüğünüz verilerde eksikler olabilir.
 

Novel Magnesium Matrix Hybrid Composites Manufactured Through Powder Metallurgy Technique

dc.authorscopusid 57203552618
dc.authorwosid Kelen, Fevzi/Iys-6120-2023
dc.contributor.author Kelen, Fevzi
dc.date.accessioned 2025-05-10T17:21:18Z
dc.date.available 2025-05-10T17:21:18Z
dc.date.issued 2023
dc.department T.C. Van Yüzüncü Yıl Üniversitesi en_US
dc.department-temp [Kelen, Fevzi] Van Yuzuncu Yil Univ, Van Vocat High Sch, Dept Motor Vehicles & Transport Technol, TR-65080 Van, Turkiye en_US
dc.description.abstract In the present study, novel magnesium matrix hybrid composites have been developed through the addition of titanium and nickel micro particulates using the hot pressing technique which is one of the powder metallurgy methods. Titanium and nickel elements were first-time used in combination as reinforcing materials in the manufacture of hybrid composites. A clean interface was obtained free from porosity, oxide and unwanted secondary phases between the matrix and reinforcement in all produced samples. In addition to the matrix and reinforcement phases, the Mg2Ni phase was also observed in the microstructural characterizations. The existence of this phase was confirmed through XRD analyses, its peak intensity increased with the increasing amount of reinforcement. While the addition of Ti and Ni provided a mean of 33 % and 83 % improvement in the yield strength and compressive strength of pure magnesium at room temperature, respectively, they did not cause a serious decrease in ductility values compared to those of ceramic reinforcement materials. The yield and compressive strengths of hybrid composites were found to be greater than those of the reference sample at all test temperatures. The mechanical properties such as yield strength, compressive strength and ductility together with low densities have shown that produced hybrid materials constitute an important alternative to traditional materials such as iron, steel and even aluminum frequently used in the manufacture of automobile components. en_US
dc.description.sponsorship [FYD-2020-8818] en_US
dc.description.sponsorship The author would like to acknowledge the financial support of Van Yuzuncu Yil University Scientific Research Projects Unit (Grant No: FYD-2020-8818) . en_US
dc.description.woscitationindex Science Citation Index Expanded
dc.identifier.doi 10.1016/j.mtcomm.2023.106348
dc.identifier.issn 2352-4928
dc.identifier.scopus 2-s2.0-85161050708
dc.identifier.scopusquality Q2
dc.identifier.uri https://doi.org/10.1016/j.mtcomm.2023.106348
dc.identifier.uri https://hdl.handle.net/20.500.14720/10366
dc.identifier.volume 35 en_US
dc.identifier.wos WOS:001040505100001
dc.identifier.wosquality Q2
dc.institutionauthor Kelen, Fevzi
dc.language.iso en en_US
dc.publisher Elsevier en_US
dc.relation.publicationcategory Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı en_US
dc.rights info:eu-repo/semantics/closedAccess en_US
dc.subject Magnesium en_US
dc.subject Titanium en_US
dc.subject Nickel en_US
dc.subject Composites en_US
dc.subject Automotive Materials en_US
dc.subject Mechanical Properties en_US
dc.title Novel Magnesium Matrix Hybrid Composites Manufactured Through Powder Metallurgy Technique en_US
dc.type Article en_US

Files