YYÜ GCRIS Basic veritabanının içerik oluşturulması ve kurulumu Research Ecosystems (https://www.researchecosystems.com) tarafından devam etmektedir. Bu süreçte gördüğünüz verilerde eksikler olabilir.
 

Two Simple Methods for Surface Modification of Lithium Disilicate Dental Blocks With Hydroxyapatite

dc.authorscopusid 57201986156
dc.authorscopusid 23501298200
dc.contributor.author Topuz, M.
dc.contributor.author Dikici, B.
dc.date.accessioned 2025-05-10T17:59:23Z
dc.date.available 2025-05-10T17:59:23Z
dc.date.issued 2020
dc.department T.C. Van Yüzüncü Yıl Üniversitesi en_US
dc.department-temp Topuz M., Department of Mechanical Engineering, Van Yüzüncü Yıl University, Van, Turkey, Natural and Applied Sciences, Department of Mechanical Engineering, Atatürk University, Erzurum, Turkey; Dikici B., Department of Metallurgical and Materials Engineering, Atatürk University, Erzurum, Turkey en_US
dc.description.abstract Crowns are materials that attracting the attention and lithium disilicates among them widely used because of their high bulk mechanical features. Increasing the bioactivity of crowns has generally been a common aspect of all studies. In this study, lithium disilicate dental blocks were coated with bioactive calcium-phosphate components using sol-gel dip-coating methods to increase their surface bioactivity. Two coating methods called as slurry and powder methods were proposed to obtain dense and remarkable layer on the lithium disilicate substrates. The coating layers were characterized by scanning electron microscopy attached with energy dispersive spectroscopy. Coating procedures have successfully accomplished and show enhanced surface properties with terms of calcium/phosphate ratios. Tri-calcium phosphate obtained by the slurry method, which has 1.5 calcium/phosphate ratio, is a favorable structure for bio-absorbable. However, the powder method has approximately 1.67 calcium/phosphate ratio which necessary for hydroxyapatite (HA) structure for higher crystallinity and lower solubility properties. © 2019 MIM Research Group. All rights reserved. en_US
dc.identifier.doi 10.17515/resm2019.132me0506tn
dc.identifier.endpage 104 en_US
dc.identifier.issn 2148-9807
dc.identifier.issn 2149-4088
dc.identifier.issue 1 en_US
dc.identifier.scopus 2-s2.0-85103497662
dc.identifier.scopusquality Q3
dc.identifier.startpage 97 en_US
dc.identifier.trdizinid 408252
dc.identifier.uri https://doi.org/10.17515/resm2019.132me0506tn
dc.identifier.uri https://search.trdizin.gov.tr/en/yayin/detay/408252/two-simple-methods-for-surface-modification-of-lithium-disilicate-dental-blocks-with-hydroxyapatite
dc.identifier.uri https://hdl.handle.net/20.500.14720/20513
dc.identifier.volume 6 en_US
dc.identifier.wosquality N/A
dc.language.iso en en_US
dc.publisher MIM RESEARCH GROUP en_US
dc.relation.ispartof Research on Engineering Structures and Materials en_US
dc.relation.publicationcategory Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı en_US
dc.rights info:eu-repo/semantics/openAccess en_US
dc.subject Calcium Phosphates en_US
dc.subject Coating en_US
dc.subject Dental Block en_US
dc.subject Lithium Disilicate en_US
dc.subject Sol-Gel en_US
dc.title Two Simple Methods for Surface Modification of Lithium Disilicate Dental Blocks With Hydroxyapatite en_US
dc.type Article en_US

Files